Handi-Foam® E-84 Class 1 - Fire Retardant Low Pressure Spray Polyurethane Foam
|
|
|
Description / Applications
PLEASE NOTE: Shipping Charges are for the Lower 48 States Only
|
|
|
P10762
|
ll-605, 205 & 105 Sq. Ft.
|
Important Requirement
Respirator Masks are required when applying two-component spray foam insulation. A mask with organic vapor filters and a prefilter for particulates is required.
Respirator Mask sold on our Safety Equipment page.
|
Product Description: Low Pressure Polyurethane Foam
Handi-Foam® E-84 Class 1 Fire Retardant Spray foams have all the same properties and advantages of our standard Two-Component foams but are also rated for applications requiring a fire retardant insulation meeting ASTM E-84 Class 1 standards. E-84 Foam Kits are ideal for applications around or near heat producing machinery or for areas where the foam will not be covered with drywall or other approved thermal barrier after it’s application. Handi-Foam® E-84 is closed cell, has a density of 1.75 lbs per cubic foot and an R-value of 6-7 per inch. E-84 Foam Kits are tack-free in less than a minute, can be trimmed and cut in 2-5 minutes and are completely cured in several hours. Foam yield is best when the foam container contents are properly warmed to a range of 75F-85F. E-84 Foam can be trimmed, sanded and painted. Foam is not UV resistant unless painted or stained. All Handi-Foam® products are completely free of any VOC’s. Handi-Foam® Two-Component E-84 Kits come with everything you will need for a successful insulation job.
Applications:
• Metal Building Wall & Ceiling Insulation
• Insulating between floor joists in Crawl Spaces and
Basements
• Moisture Control for Agricultural Buildings, Silo’s, Potato Barns
etc.
• Pipe & Duct Chases
• Insulation near machinery/heat
• Wherever Cured Foam is left exposed
• Replaces E-84 Caulking where applicable
• Insulating between floor joists in Crawl Spaces and Basements
• Sound Deadening and Control
• Recreational Vehicles
• Hot Tubs / Spas
• Full Home Insulation
Density - 1.75 lb/ft3 (28 kg/m3)
|
P10762
Approx. 605 sq. ft. at 1" thickness
$609.00
Please Call for Pallet Price
|
|
P10726
|
P10726
Approx. 205 sq. ft. at 1" thickness
Please Call for Pricing
Pallet - 26 kits / pallet
Please Call for Pallet Price
|
|
P10705
|
P10705
Approx. 105 sq. ft. at 1" thickness
$234.04
Pallet - 26 kits / pallet
Please Call for Pallet Price
|
|
Handi-Foam® Quick Cure Foam Kits - Large
|
|
|
Description / Applications
PLEASE NOTE: Shipping Charges are for the Lower 48 States Only
|
|
|
|
ll-605, 205 & 105 Sq. Ft.
|
Important Requirement
Respirator Masks are required when applying two-component spray foam insulation. A mask with organic vapor filters and a prefilter for particulates is required.
Respirator Mask sold on our Safety Equipment page.
|
Product Description: Low Pressure Polyurethane Foam
The kits come with hoses, spray gun and 8 nozzles. Two-component froth systems will expand immediately upon chemical reaction of A component and B component to a final volume that is 3 to 5 times the dispensed volume, in typical applications, and may be as much as 8 times the dispensed volume in a specific applications, depending on various factors such as cavity size, ambient conditions, etc. The foam will cure to a semi-rigid closed cell foam upon the chemical reaction of component A (polymeric isocyanate) with component B (a polyol blend containing certain additives). Handi-Foam® Quick Cure is tack-free in 1 minute, cuttable in 5 minutes and fully cured in 1 hour.
Applications:
• Insulating, air sealing, and code compliance
• Filling cracks and small voids - air sealing
• Converting vans & buses - adhesive and anti-vibration
• Sealing around pipes & duct work
• UL-94 Recognized
Density - 1.75 lb/ft3 (28 kg/m3) and 2.5 lbs./ft.3
(40 kg./m.3)
|
P10749
Approx. 605 sq. ft. at 1" thickness
Please Call for Pricing
Please Call for Pallet Price
|
|
P10720
|
P10720
Approx. 205 sq. ft. at 1" thickness
$329.79
Pallet - 26 kits / pallet
Please Call for Pallet Price
|
|
P10700
|
P10700
Approx. 105 sq. ft. at 1" thickness
$225.53
Pallet - 26 kits / pallet
Please Call for Pallet Price
|
|
Handi-Foam® Quick Cure Foam Kits - Small
|
|
|
Description / Applications
PLEASE NOTE: Shipping Charges are for the Lower 48 States Only
|
|
|
P10600
|
ll-12 & 22 Sq. Ft.
|
Important Requirement
Respirator Masks are required when applying two-component spray foam insulation. A mask with organic vapor filters and a prefilter for particulates is required.
Respirator Mask sold on our Safety Equipment page.
|
Product Description: Low Pressure Polyurethane Foam
The Two-Component Compact kits are applied with a thumb-control roller system (included), allowing for controlled dispensing. These lightweight kits are ideal for small projects. Handi-Foam® Two-Component Foam cures tack-free in less than 60 seconds. Paint-able and sand-able 2-5 minutes after application. See Tech Data Sheet.
Applications:
• Insulating, air sealing, and code compliance
• Filling cracks and small voids - air sealing
• Converting vans & buses - adhesive and anti-vibration
• Sealing around pipes & duct work
• UL-94 Recognized
Density - 1.75 lb/ft3 (28 kg/m3)
|
P10600
Approx. 12 sq. ft. at 1" thickness
$31.86
|
|
|
Please Call for Pallet Price
|
|
P10650
|
P10650
Approx. 22 sq. ft. at 1" thickness
$47.82
|
|
|
Please Call for Pallet Price
|
|
Handi-Foam® Low Pressure Spray Polyurethane Cylinder Foam Sealant
|
|
|
Description / Applications
PLEASE NOTE: Shipping Charges are for the Lower 48 States Only
|
|
|
P40340
|
160 oz - Gun Foam with Accessories
|
Important Requirement
Respirator Masks are required when applying two-component spray foam insulation. A mask with organic vapor filters and a prefilter for particulates is required.
Respirator Mask sold on our Safety Equipment page.
|
Product Description:
40 Series Gun Foam with Accessories can be ordered either with or without hoses and applicators. Providing the most efficient application for large projects, cylinder foam is often chosen by professionals over straw or gun foam. Handi-Foam® Cylinder Foam, like our straw foams, is tack free in less than 10 minutes and fully cured in approximately one hour.
.
**These canisters are basically large cans of one-component straw foam. They come with a 9½' hose and brass applicator tip. The option is the brass fitting can be replaced with hose and adapter ($20.08-#F61125) that allows the hose to be fitted to the bottom of the Convertible dispensing unit gun (#F61110) above. For better controlled application, coverage and continuous use of these canisters by a tradesman, the gun & conversion kit is recommended. One time users are fine with the way it comes and don't need to order the dispensing gun.
Typical Applications:
• Air Sealing in New Construction and Retrofit
• Filling gaps around pipes
• Filling cracks & voids
• Any application where you would use a lot of
canned straw foam
|
P40340
160 oz.
Approx. Yield - Bead Size
| 1/4" |
3/8" |
1/2' |
| 19,572 ft. |
8,688 ft. |
4,887 ft. |
$88.00 each
|
|
P40540
|
260 oz - Gun Foam with Accessories
|
Important Requirement
Respirator Masks are required when applying two-component spray foam insulation. A mask with organic vapor filters and a prefilter for particulates is required.
Respirator Mask sold on our Safety Equipment page.
|
Product Description:
40 Series Gun Foam with Accessories can be ordered either with or without hoses and applicators. Providing the most efficient application for large projects, cylinder foam is often chosen by professionals over straw or gun foam. Handi-Foam® Cylinder Foam, like our straw foams, is tack free in less than 10 minutes and fully cured in approximately one hour.
.
**These canisters are basically large cans of one-component straw foam. They come with a 9½' hose and brass applicator tip. The option is the brass fitting can be replaced with hose and adapter ($20.08-#F61125) that allows the hose to be fitted to the bottom of the Convertible dispensing unit gun (#F61110) above. For better controlled application, coverage and continuous use of these canisters by a tradesman, the gun & conversion kit is recommended. One time users are fine with the way it comes and don't need to order the dispensing gun.
Typical Applications:
• Air Sealing in New Construction and Retrofit
• Filling gaps around pipes
• Filling cracks & voids
• Any application where you would use a lot of
canned straw foam
|
P40540
260 oz.
Approx. Yield - Bead Size
| 1/4" |
3/8" |
1/2' |
| 31,347 ft. |
13,914 ft. |
7,827 ft. |
Call for Pricing
|